Parts for Kenmore Models RE14010C2D REV A

Water inlet valve with mounting bracket (valve)

The water fill valve kit attaches the water lines on the back of your washer. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed. This kit includes a blue body fill valve, a mounting bracket and a screw. The valve body of this part could be blue or green in color. There are two ports for water to enter, and this valve is compatible with a half inch ID hose. It has two 3/4-11x1/2 NHT hose threads. This is a genuine OEM part. Please remember to disconnect the power and the water supply before starting your repair.

Easy Part #:: EAP334646

Availability:: In Stock

Price:: $32.45

Surface burner plug-in block kit (range element receptacle)

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw. This part is used to connect the wire harness to the surface burner element. If your element will not heat at all, or if it is not heating properly, it is likely an issue with the terminal block and it will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power supply before starting your repair.

Easy Part #:: EAP340571

Availability:: In Stock

Price:: $12.63

Freezer door key

This white plastic freezer door key is used for most upright or chest freezers. If your door key becomes broken or lost it will need to be replaced. This is a genuine OEM part. It is sold individually.

Easy Part #:: EAP1991481

Availability:: In Stock

Price:: $10.57

Refrigerator pantry drawer door cover (pantry lid assy)

The pantry drawer lid helps keep everything inside the drawer, it acts as a cover and keeps your drawer at the proper temperature by creating a seal. If the door will not open or close, or if the drawer section is too cold, you may need to replace the lid. The pantry drawer lid is a genuine OEM part.

Easy Part #:: EAP11723190

Availability:: In Stock

Price:: $97.09

Center rail (rail, center crisper)

This is the center support rail for the refrigerator crisper drawer. This rail supports center of the crisper frame.

Easy Part #:: EAP11752912

Availability:: In Stock

Price:: $23.44

Burner grate pads - kit of 5 (rubber foot-viton)

These pads go on the bottom of your gas cooktop grates to prevent them from moving and scratching the top of your appliance.

Easy Part #:: EAP389174

Availability:: In Stock

Price:: $9.04

Igniter kit (ignitor)

This silicon carbide igniter with ceramic holder kit includes the 3-inch flat igniter, mounting bracket, 4-inch wire leads, and the plug. It can replace both round and flat igniters. This kit is used for many gas clothes dryers. This part ignites the gas within the dryer to heat the dryer during the cycle, so if your dryer takes too long to dry, has no heat or not enough heat, you may need to replace the igniter. Be sure to disconnect the power source from your dryer before you do this repair. The igniter is very fragile and should be handled with care.

Easy Part #:: EAP334180

Availability:: In Stock

Price:: $36.81

Bake element - push on terminals - 240v (bake element)

The bake element is located on the bottom of the oven with male spade terminals and push-on terminals. The bake element provides heat for baking. If your oven is too hot, not heating evenly, element is not heating, or little to no heat when baking, you may need to replace your bake element. This is a genuine OEM part. Please remember to disconnect the power to the range before starting your repair.

Easy Part #:: EAP249238

Availability:: On Order

Price:: $82.03

Lower rack (rack asm final lower)

The lower rack provides easy loading with flexibility for small and large items, and helps hold the dishes in place during the wash and dry cycle. The rack measures approximately 20.48 X 21.99 and the wheels are included with the rack. This is a genuine OEM part and is white in color.

Easy Part #:: EAP17137102

Availability:: In Stock

Price:: $181.05

Drawer slide rail - left side (refrigerator crisper drawer slide (rail) assembly for left-hand side.)

When looking inside the fridge, this white drawer slide rail is located on the left side of the refrigerator. This part includes the rail only.

Easy Part #:: EAP306943

Availability:: In Stock

Price:: $31.97

Mounting bracket (bracket, undercounter)

The mounting bracket is used to attach the dishwasher to the underside of the counter. The mounting bracket holds the dishwasher in place to keep it from moving during cycles and to keep the dishwasher level. The bracket is made of metal and is approximately 3” in length. The screws are not included with the bracket, they must be ordered separately. This is a genuine OEM part. Please remember to disconnect the power and the water supply to the dishwasher before starting the repair.

Easy Part #:: EAP11745496

Availability:: In Stock

Price:: $15.86

Shelf retainer bar end cap

The door shelf retainer bar end cap helps keep the retainer shelf bar in place to hold items on the door shelves. The end cap can be used for the left or right side of the door. This door end cap is almost two inches long, white in color, made entirely of plastic, and sold individually. This is a genuine OEM part.

Easy Part #:: EAP11743131

Availability:: In Stock

Price:: $18.27

Lower wheel assembly (wheel assembly (lwr))

The rack wheel and axle attach to the lower rack to allow you to slide the rack in and out easily. If your dish rack is not moving in and out of the dishwasher properly, you may have a broken or missing wheel and it will need to be replaced. The wheel and axle are white in color, made of plastic, and sold individually. This is a genuine OEM part kit.

Easy Part #:: EAP11747717

Availability:: In Stock

Price:: $11.73

Temperature sensor (sensor temp)

The temperature sensor, also known as a thermistor, helps detect the temperature inside the refrigerator and sends the information to the control board. If your refrigerator is too warm or not cooling properly, you may need to replace the temperature sensor. This is a genuine OEM part. Please make sure to disconnect the power to the refrigerator before starting your repair.